Note: very similar to a hub assy.
Tools
Hex Key Set
Socket Wrench
Needle Nose Ring Pliers
Air Hammer
Sledge Hammer
Your whole Hammer collection!
Air Chisel
Block of Wood
Torch
Grease
Rags
Hammers
Clean Layout
frame sliders install for a '96 - '99 gsxr.. by henry
|
Sales |
Video/Pictures |
Parts |
Contact |
|
Note: very similar to a hub assy. |
Tools Hex Key Set Socket Wrench Needle Nose Ring Pliers Air Hammer Sledge Hammer Your whole Hammer collection! Air Chisel Block of Wood Torch Grease Rags Hammers Clean Layout |
Time: 30 mins | |
|
|
Take off wheel, may have to use a drill in
combination of a torch to get the nuts off the stripped studs. Worse
part of it, patience & a lot of tries. Unless you would like to skip
straight to using the torch without regards to the wheel/rim then will be
very quick.
|
||
|
|
Use a hex key or whatever tool needed to take off the outer
cap.
|
||
|
|
then use the pliers to take out the ring seals, followed by
all the other rings, rotors, mechanical moving parts.
|
|
|
make sure with each part taken out of the wheel hub is placed in orderly fashion so they can be put back in the same order. Lots of grease on hand if needed on any replacement parts. |
||
|
|
okay, now lay the rotor assy. face down on a
piece of cardboard and then start hammering away, may have to use a sledge
hammer.
|
||
|
|
stripped studs..
|
|
|
now this is where an air hammer/chissel will come in handy to try and get them back into the grooves as far as possible.
|
||
|
|
Reverse step-by-step. |
||
|
|
done. |
|
Sales |
Video/Pictures |
Parts |
Contact |
